A high-performance, lightweight hybrid D-shackle combining heat-treated high-tensile steel alloy pins and thimbles with a heat-treated, abrasion-resistant UHMWPE synthetic crown. More than 50% lighter than conventional steel shackles.
Features
- More than 50% lighter than conventional steel shackles
- 5:1 safety factor
- Low risk of explosive disintegration
- Hydrophobic synthetic crown with no water absorption
- Maintains high strength around tight-radius bends
- Integrated locking end cap with a 10° off-centre safe-loading limit
- High-tensile steel alloy pins suit most OEM recovery points
- Tested and certified; replacement parts can be recertified
- Excellent abrasion and UV resistance, with good chemical resistance
Construction & Technical
| Synthetic crown | Heat-treated, abrasion-resistant UHMWPE; 3.5% elongation at break |
|---|---|
| Pins and thimbles | Heat-treated high-tensile steel alloy |
| Tensile / yield strength | 1200 MPa / 1100 MPa |
| Hardness | 35 Rockwell C |
| Minimum elongation | 10% |
| Finish | Two-part epoxy coating |
| Pin guarantee | 3 years, subject to proper use |
Applications
- Conventional shackle replacement
- Salvage
- Heavy vehicle towing and recovery
- Heavy lifting
Options
- Longer lengths available
- Reconnect eye-bolt available
- Replacement parts and recertification available
Standard Range
| Minimum Break Load (t) | Safe Working Load (t) | Approx. Weight (kg) |
|---|---|---|
| 62.5 | 12.5 | 2.2 |
| 125 | 25 | 7.4 |
| 175 | 35 | 11.0 |
| 275 | 55 | 18.6 |
| 350 | 70 | 28.0 |
| 400 | 80 | 32.0 |
| 500 | 100 | 47.0 |
Safety: Do not exceed the safe working load. Do not use below 0°C / 32°F, and do not side-load beyond 10°. Inspect before and after every use.
