| Southern Dyneema Braid. |
|
|
| Dyneema (also known as Spectra) braid is a very strong, low stretch and a lightweight line. The 100% Dyneema braided core is covered by a special spun polyester braided cover to bond the cover with the core during high load applications, using clutch type jammers. The cover is a fine multi-carrier braid using high tenacity polyester and solution dyed polyester with a similar tenacity. Used for halyards, guys, racing control lines and sheets, low stretch high load applications |
| Diameter (mm) |
Reel Size (m) |
Meters / KG |
Break Load |
Reference # |
| 4 |
200 m |
90 m |
780 kg |
YBS04SC |
| 5 |
200 m |
47 m |
1200 kg |
YBS05SC |
| 6 |
200 m |
38 m |
1730 kg |
YBS06SC |
| 8 |
200 m |
25 m |
3570 kg |
YBS08SC |
| 10 |
200 m |
15 m |
6240 kg |
YBS10SC |
| 12 |
200 m |
10 m |
8160 kg |
YBS12SC |
| 14 |
200 m |
7.5 m |
12480 kg |
YBS14SC |
| 16 |
200 m |
5.6 m |
15360 kg |
YBS16SC |
| 18 |
200 m |
4.5 m |
19200 kg |
YBS18SC |
| ZS Dyneema® yacht braid |
|
|
High performance yacht rope for grand prix racing, SK75 heat treated core with largo bonding solution applied in the process. The cover has a reinforced Vectran® jacket blended with staple spun polyester fibres and continuous filament polyester fibres.
This cover braid resists slippage and damage far better than any standard polyester cover braid, it can handle a very high jammer loading with a much higher resistance to heat build up under high winch working loads as the blended Vectran® fibres have a much higher melting point than standard polyester and remain very stable under continuous working loads. |
| Diameter (mm) |
Reel Size (m) |
Meters / KG |
Break Load |
Reference # |
| 8 |
200 m |
25 m |
4170 kg |
YBZS08 |
| 10 |
200 m |
15 m |
6240 kg |
YBZS10 |
| 12 |
200 m |
10 m |
9225 kg |
YBZS12 |
| Titan Dyneema Braid |
|
|
| Special performance braided rope, with polyester filler core and tight balanced braided Dyneema® SK65 cover braid. Very hard wearing, low friction rope with low stretch and a high working load. This is a high quality, low stretch leech line that will grip firmly in a leech line cleat. Used for performance yachting applications, leech lines and where low friction ropes are required with ultra low stretch. |
| Diameter (mm) |
Reel Size (m) |
Meters / KG |
Break Load |
Reference # |
| 3 |
100 m |
150 m |
400 kg |
YSS03LZR |
| 4 |
100 m |
103 m |
500 kg |
YSS04LZR |
| 5 |
100 m |
59 m |
720 kg |
YSS05LZR |
Uses
High load control applications, where ultra low stretch is required, e.g. halyards, check stays, runners, traveller lines, special cable pulling lines, seismic instrument towlines, winch lines, camera guy lines and on radio antennas.
| Spec - 12 |
|
|
Twelve-strand braid of 100% Dyneema® fibres with a protective coating of coloured urethane, which increases the abrasion resistance and prolongs the life of the rope. Available in different colours. Spec 12 is easily spliced but a reinforced thimble is recommended due to the high tensile loading attributes.
Characteristics: Safer than wire, lighter than wire, no wire splinters, does not kink and it floats.
|
| Diameter (mm) |
Reel Size (m) |
Meters / KG |
Break Load |
Reference # |
| 2 |
200 m |
350 m |
380 kg |
YSS02S12 |
| 3 |
200 m |
285 m |
960 kg |
YSS03S12 |
| 4 |
200 m |
145 m |
1440 kg |
YSS04S12 |
| 5 |
200 m |
88 m |
2400 kg |
YSS05S12 |
| 6 |
200 m |
56 m |
3840 kg |
YSS06S12 |
| 7 |
200 m |
45 m |
4800 kg |
YSS07S12 |
| 8 |
200 m |
36 m |
6240 kg |
YSS08S12 |
| 10 |
200 m |
27 m |
8160 kg |
YSS10S12 |
| 12 |
200 m |
17 m |
12 480 kg |
YSS12S12 |
| 14 |
200 m |
13 m |
16 200 kg |
YSS14S12 |
| 16 |
200 m |
9.7 m |
21 159 kg |
YSS16S12 |
|
Spec-10
Multi-strand braid of Ultra high tenacity SLHS fibre similiar to well proven Spec-12, heat set and treated to increase abrasion resistance and to prolong the life of the rope. Only available in purple colour.
Characteristics: Safer than wire, lighter than wire, no wire splinters, does not kink and it floats.
|
|
Size
(mm)
|
Break Load |
| 4mm |
1200kg |
| 6mm |
2400kg |
| 8mm |
3600kg |
| 10mm |
6000kg |
| Vec - 12 |
|
|
Vec-12 is manufactured from 100% Vectran™ fibres into a special 12 strand construction that is easy to splice.Vectran™ fiber exhibits exceptional strength and rigidity.Pound for pound Vectran™ fiber is five times stronger than steel and ten times stronger than aluminum. These unique properties characterize Vectran™:
• High strength and modulus• Excellent creep resistance• High abrasion resistance• Excellent flex/fold characteristics• Minimal moisture absorption• Excellent chemical resistance• Low coefficient of thermal expansion (CTE)• High dielectric strength• Outstanding cut resistance• Excellent property retention at high/low temperatures• Outstanding vibration damping characteristics• High impact resistance• 330 Degrees Celsius melting point.
|
| Vectran™ HT is solving performance problems in critical marine, military, and industrial rope and cable applications. High strength with excellent creep resistance allows manufacture of high performance ropes that are stable to extended loads. Superior abrasion resistance, excellent moisture resistance, and exceptional property retention over broad ranges of temperature and chemical environments, provide solutions to industrial wear and degradation problems experienced with existing fiber products. Vectran™ HT is an outstanding candidate for replacement of steel and stainless steel constructions. Vectran™ is a high-modulus, low elongation alternative for applications requiring high stiffness, such as reinforcement of composites or electromechanical cables. |
| Diameter (mm) |
Average Break Load |
Reference # |
| 4 |
1 440 kg |
YBV04 |
| 5 |
2 160 kg |
YBV05 |
| 6 |
2 880 kg |
YBV06 |
| 8 |
5 760 kg |
YBV08 |
| 10 |
9 000 kg |
YBV10 |
| 12 |
12 240 kg |
YBV12 |
| 16 |
18 000 kg |
YBV16 |
| DynaX78 |
| Diameter (mm) |
Break Load |
Reference # |
| 4mm |
2400 kg |
YSX04S12 |
| 5mm |
3840 kg |
YSX04S12 |
| 6mm |
4800 kg |
YSX04S12 |
| 7mm |
6240 kg |
YSX04S12 |
| 9mm |
11700 kg |
YSX04S12 |
| 11mm |
16200 kg |
YSX04S12 |
Vectran Yacht Braid
| Vectran yacht braid makes it ideal for a static high load application with zero stretch and creep. The core is made from a high performance Thermoplastic yarn spun from liquid Crystal polymer which is treated and heat set and overed with HT polyester fibres. |
| Diameter (mm) |
Reel Size (m) |
Break Load |
REFERENCE # |
| 8 |
200 m |
3 650 kg |
YBV08SC |
| 10 |
200 m |
5 840 kg |
YBV10SC |
| 12 |
200 m |
7 500 kg |
YBV12SC |
| 14 |
200 m |
10 100 kg |
YBV14SC |
| 16 |
200 m |
11 950 kg |
YBV16SC |
| 18 |
200 m |
14 500 kg |
YBV18SC |
| 20 |
200 m |
18 000 kg |
YBV20SC |
| 22 |
200 m |
21 500 kg |
YBV22SC |
| 24 |
200 m |
25 300 kg |
YBV24SC |
|
Custom Racing Yacht Braid
|
|
PBO, Vectran, Technora and Polyester
|
|
|
|
PBO, Technora and Polyester blended cover braided jackets on Dyneema heat treated core.
|
Diameter (mm)
|
Reel Size (m) |
Break Load |
Reference # |
| 6 |
200 m |
1440kg |
|
| 8 |
200 m |
3840kg |
|
| 10 |
200 m |
6240kg |
|
| 12 |
200 m |
8160kg |
|
| 14 |
200 m |
12480kg |
|
| 16 |
200 m |
16200kg |
|
|
|
